910 RS232 Pulse Output 1-10Type of Coins Multi Coin Acceptor to PC COM Interface

Description

Plastic Front Plate
Connection
POWER:
you need to connect power even
if you use RS232 only
5P WIRE (PULSE), 4P WIRE(RS232-COM)
Specification
Coin Diameter
： 15mm-32mm
Atmospheric Pressure
： 86Kpa—106Kpa
Signal Output
：pulse and RS232
Coin Thickness
：1.2mm-3mm
Accuracy Rate of Identification
：99.5%
Speed
：≤0.6s
Working Voltage
： DC +12V ±10%
Working Humidity
：≤95%
Working Current
： 65mA ±5%
Connection and Switches
Please program coins based on following table:
Code
Description
Default
Range
Setting No.
Manual
PC
E
Total amount for coin types
01
1-10
A
-  Only on windows system
-    Reference to attachment 2
P + figure
P：Pulse output
01
1-99
Figure: Coin sorting order
A + figure
A:sample coin
None
B
Figure: Coin sorting order
F + figure
accuracy
05
1-10
C
Figure: Coin sorting order
1
NO and NC
NC
D
2
Duration:30ms, 50ms, and 100ms
100ms
AP
Collect received multi pulse to output 1 pulse
01
1-99
E
Re-count if it has no signal action after 1 minute
Example:
(1) 05- output 1 pulse signal per 5 collected pulse.
(2) if 3 pulse is collected and not any more after 1 minute, 3 collected pulse is removed for AP mode.
Setting Note
(1) Please use button “ADD” and “MINUS” to adjust number
Please push button “SET” to switch to next code
Please push button “SET” to skip, if you do not need to adjust for code, please push button SET to skip.
(2) Usually, free to use coin acceptor after set up A and B.
C, D, and E is not necessary to adjust.
Manual Setting No.
A.1.Push button ADD, “
E
” shows up. Please adjust number.
2.Push button SET, “P1” shows up. Please adjust number for first type of coin.
3.Please push button SET, “P2 show up. Please adjust number for second type of coin.
4.Please repeat No.3 to set up “P+ figure” until all type of coins is finished.
B.1.Hold on button SET for 3 seconds, “A1” shows up.
2.Please push button SET, “A2” show up. Please adjust number for second type of coin
3.Please repeat No.3 to set up “P+ figure” until all type of coins is finished.
C.1.Push button Minus, “F1” shows up. Please adjust number for first type of coin.
2.Please push button “SET”, “F2” show up. Please adjust number for second type of coin.
3.Please repeat No.2 to set up “F+ figure” until all type of coins is finished.
Note: 1 is most accuracy.
D.1.Hold on button “ADD” for 3 seconds, “
1
” shows up. Please adjust to NO or NC
2.Push button SET, “2” shows up. Please adjust to 30 (30ms) or 50(50ms) or 10(100ms)
E.1.Hold on button “SET” and “ADD” simultaneously, please adjust number for pulse.
2.Push button SET to finish.
3.Coin acceptor restarts automatically.
Baud Rate: 9600 bps
Connection:
​
PC Setting Panel:
​
READ
load value from connecting coin acceptor
Write
write current value to coin acceptor
Load
load value from file
Save
save current value to file
Active
tick- Enable to use the channel
not Tick- not enable to use the channel
Click Read -> all value shows up -> change value -> Click Write
Test Panel:
​
1.Choose interface
2.Click Start
3.Insert coins
4.Click stop for pause
5.Clear: Reset after click clear
6.accumulated if not re-install software and click clear
RS232 protocol
Baud Rate: 9600 bps
1. Normal idle status bytes will report one group data
A1 A2 A3 A4 A5
A1: Header byte 0x98
A2: Mulpitly of setting
A3: Divide of setting
A4: Coin value mount stored inside the EU1
A5: Check sum of the bytes before
2. Coin data receiverd will include three groups data
A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15
A1: Header byte: 0x97
A2: Mulpitly of setting
A3: Divide of setting
A4: Coin value accepted
A5: Check sum of the bytes before
A6: Header byte:0x91
A7: Reserved
A8: Pulse width of setting
A9: Reserved
A10: Check sum of the bytes before
A11: Header byte:0x94
A12: Reserved
A13: Pulse width of setting
A14: Coin channel (From BANK A: 1 to 6 and BANK B: 7 to 12)
A15: Check sum of the bytes before
3. Error coin data will include one group data
A1 A2 A3 A4 A5
A1: Header bye: 0x92
A2,A3,A4: Reserved
A5: Check sum of the bytes before
4. Right coin data but coin jammed inside the EU1 will include two groups data
A1 A2 A3 A4 A5 A6 A7 A8 A9 A10
A1: Header bye: 0x93
A2 A3 A4: Reserved
A5: Check sum of the bytes before
A6: Header bye: 0x92
A7 A8 A9: Reserved
A10: Check sum of the bytes before
Test
Example
If your computer have USB interface only, please add a USB to COM wire
---------------------------------------------------------------------------------------------------------------------------------
Warranty
l
We accept return
in 7 days
after buyer receive the goods. Buyer pay for the fore and back shipping charge if it is not seller’s mistake. In the unlikely event that item can not work well, seller pay for the fore and back shipping charge for a new one or issue buyer refund.
l
For “any type of BOX”, we DO NOT accept return. In the unlikely event that there is a problem, seller sends parts to buyer for replacing.
l
1 year warranty.
Shipping
POST
l
Tracking number is provided after sending and available for tracking 3 days later.
please inform us if the tracking number is not trackable after 3 days.
l
To
United States
, we send by e-pocket.
For
RUSSIA, please provide FULL NAME for sending.
EXPRESS
l
Usually, The local customs charges tax when goods arrive at local customs. Please double check if it is ok before choosing express.
Every country has different RATE FOR TAX. Please check rule with your customs.
l
To
RUSSIA
, we only send by DHL or EMS.
To
Brazil
, we don’t send by any express.
l
Some countries we send by DHL, some countries, we send by FEDEX. If you need SPECIFIC EXPRESS WAY, please inform us on order page.
The following form is estimated delivery time
Country
Estimated Delivery Time
POST
EXPRESS
United States
10-20 working days
5-10 days
Australia/Canada/Germany
14-20 working days
United Kingdom/Spain/Norway/Greece/France/Israel
14-25 working days
Brazil/Armenia
60 days
Please double check with us
Russia/Bolivia
14-30 working days
Conbine shipping charge
You send a list to us
-->
we send a quotation in 24 hours
-->
You bid all items on and click buy them all if you agree the quotation
-->
we correct the total amount
-->
You make a payment
-->
we send your goods.
Other information
l
We will declare low value for you. If you need us to declare real value, please inform us on order page.
l
Please note clear speciation on order page for items, like COLOR, SIZE, etc. or it may be picked up by random.
l
If we need any information to confirm with you, we will send message on order page. Please pay attention on it before sending goods.
Feedback
l
We appreciate if you leave the feedback after you test your goods.
l
Please
communicate
with seller when you have questions instead of leaving feedback directly or open a dispute. We will provide suggestions in 24 hours after you send message to us.
l
If you have any questions, please let us know. We will reply to you
in 24 hours
.